problems.
2. Protect valuables on the construction site
3.Use plaster to level uneven places or crevices in the wall.After the leveling area is dry, use sandpaper to grind off the
protruding water plaster to make the wall smooth
4. Cleaning: Clean up the dust generated by sanding.
5.Choose the right putty: choose a good quality putty according to the wall situation. Full scraping putty: use a rubber scraper
to scrape horizontally, a scraper followed by a scraper, and there is no chauffeur at the joint. Cleaning: After each area is
scraped, clean the residual putty on the scraper in time.
6.Wait for drying: Make sure the first coat of putty is completely dry. Sanding with sandpaper: Use sandpaper to sand the wall to
make the surface smoother and smoother.
7.Stir the latex paint: Stir the latex paint fully before use, if it is not very thick, it is not suitable to add water. Painting
latex paint: Divided into three coatings, each painting method is the same, quickly operate to prevent the latex paint film from
drying too quickly, to ensure that the painting is even, no falling, no missing brush.
8.Check and see how the product is performing
protruding water plaster to make the wall smooth
4. Cleaning: Clean up the dust generated by sanding.
5.Choose the right putty: choose a good quality putty according to the wall situation. Full scraping putty: use a rubber scraper
to scrape horizontally, a scraper followed by a scraper, and there is no chauffeur at the joint. Cleaning: After each area is
scraped, clean the residual putty on the scraper in time.
6.Wait for drying: Make sure the first coat of putty is completely dry. Sanding with sandpaper: Use sandpaper to sand the wall to
make the surface smoother and smoother.
7.Stir the latex paint: Stir the latex paint fully before use, if it is not very thick, it is not suitable to add water. Painting
latex paint: Divided into three coatings, each painting method is the same, quickly operate to prevent the latex paint film from
drying too quickly, to ensure that the painting is even, no falling, no missing brush.
8.Check and see how the product is performing