Automatic Water Barrel Washing Filling Capping Machine Features1. Equipment internal cleaning with independent control of the 2-station high-pressure washing, the end of the finished product with no water cycle to prevent secondary pollution, but also reduce production costs.
2. When the sensor at the rear of the device detects the bottle into the filling machine, the machine drive mechanism begins to work and the bottle is sent to the first station for flushing. Transmission mechanism to stop working.
3. After the nozzle is aligned with the bottle, the flush pump starts to work. After the flushing pump has finished the rinse time, it will stop automatically. The drive sends the bottle to the second station, and then starts the second station cleaning process until the rinsing process is complete.
4. After the internal washing process is complete, the drive rotates the bottle 150 °, the bottle is on the slope, under the action of gravity, the bottle automatically falls off, the plastic bottle on the mobile device, the mobile device automatically push the bucket to the filling position.
5. Filling the pump to working, filling time can be fine-tuned (according to the actual situation adjustment)
6. After the filling is complete, the cylinder will push the empty bottle back and push the bottle, push the bottle into the cover cap station。
7. The capping station is made of centrifugal trim, with one chute,Slide adjustable, strong applicability.
8. Cap requirements: cap diameter φ56mm high 35 mm, braid width 8 mm, braid height of not less than 16 mm.